Evolve LRM-1000 Datasheet download pdf (Page 1)

2013

PRODUCT OVERVIEW

LRM-1000

Description

The Evolve Wall Mounted Dimmer is a component of the Evolve lighting control system. It is fully

scene capable and can handle loads of up to 1000W for control of permanently installed lighting

xtures only (not for control of receptacles). The Evolve Wall Mounted Dimmer is easily wired

in place of a standard wall dimmer in any existing environment. Inclusion of this Dimmer on a

Z-Wave network allows remote ON/OFF control and dimming of loads connected. This device is

compatible with Z-Wave security systems and the Auto-Sense feature allows for local lamp

activation independent of the Z-Wave controller status.

This Wall Mounted Dimmer is designed to work with other Evolve enabled devices. Evolve nodes

of other types can be included in the network and will also act as repeaters to increase the range

of the network. The Dimmer also has a replaceable trim ring available in assorted colors.

As part of a Z-Wave network, the LRM-1000 will also act as a wireless repeater to ensure that

commands intended for another device in the network are received. This is useful when the

device would otherwise be out of the radio range of the wireless controller.

Specications

• SKU: LRM-1000

• Supported Networks:

- Z-Wave – Signal (Frequency) 908.42 MHz

• Range: Up to 100 feet line of sight between the Wireless Controller and/or the closest Evolve

Receiver Module

• Power: 120 VAC, 500W, 60 Hz

• Dimensions: 4.5” H x 2.75” W x 1.75” D

• Weight: 0.33 lbs.

• Requires a Neutral

Product

Dimmer

1 2

2013PRODUCT OVERVIEWLRM-1000DescriptionThe Evolve Wall Mounted Dimmer is a component of the Evolve lighting control system. It is fully scene capable

2013PRODUCT OVERVIEWWiringThe LRM-1000 is wired in the same fashion as a conventional digital switch – it requires a minimum of 3 wires to operate:•

No comments

Evolve LRM-1000 Datasheet Page 1